Description
Straight connector for 8 mm SMD/COB LED strips, 4,5 A
The straight connector for 8 mm SMD/COB LED strips, 4,5 A is a transparent snap-fit connector designed to join the ends of lighting strips directly. Two openings on opposite sides of the housing allow sections of strip to be aligned along the same axis, without a separate length of cable.
The connector has a plastic cover enclosing metal clamping components. This connection helps extend a continuous line of light when joining two separate strips is required instead of connecting a cable. The housing remains compact, and its transparent design allows the contact assembly to be seen.
The connector is designed for SMD and COB strips, which differ in how their LEDs are arranged but are available with a compatible connection standard. The offer includes one connector without cables or lighting strips.

Straight connector for two sections of LED strip
Once the strip ends are seated in the housing, the contacts are pressed into place at the joint. The snap-fit mechanism replaces a soldered connection between the strip contact points and allows the electrical paths to continue through the component positioned between the strips.
The absence of an intermediate cable means that the installation sections continue in the same direction. This matters in straight runs where a cable routed outside the connector is unnecessary. This is a straight connector, rather than a corner connector, splitter or connection with a loose cable.
The transparent housing is made of plastic. This IP20-rated accessory is intended for indoor use without contact with water. The installation must have a compatible pin count, strip width, current and voltage. The connector does not replace a suitable power supply.


Product specifications
- Type: straight connector without cable
- Strips: SMD/COB, 8 mm wide
- Connection: 2 pins
- Current: 4,5 A
- Voltage: 12 V or 24 V
- Material: plastic
- Housing colour: transparent
- Protection rating: IP20
- Quantity included: 1 piece
Product dimensions
- Width: 1 cm
- Height: 0,5 cm
- Depth: 1,1 cm
- Gross weight: 0,002 kg

Why choose a straight LED strip connector?
- Direct strip connection – two sections can run in a single straight line.
- No cable in between – the connector does not create a cable outlet to the side.
- Snap-fit contacts – electrical contact is established without soldering the strip.
- Designed for SMD and COB – suitable for compatible strips using either technology.
- Transparent housing – allows the arrangement of the contact components to be inspected.
- Compact body – occupies only the area between the ends of the connected strips.
Who is this product suitable for?
The connector is intended for anyone extending linear strip lighting by adding another section of compatible strip. It is suitable for joining components in dry indoor spaces, provided the correct electrical and dimensional standards are maintained.
It is particularly useful when a straight connection between strip ends is required without an intermediate cable. Installations that require cables to be routed from the end of the strip need a different type of connector with a factory-fitted cable.
Summary
The straight SMD/COB connector is a single transparent clamping component for joining two sections of strip without a cable. It maintains a straight lighting run and establishes an electrical contact connection without soldering to the strip.









Reviews
There are no reviews yet.