Description
Double-ended connector for 10 mm single colour LED strips
Double-ended connector for 10 mm single colour LED strips joins two sections of a single colour lighting strip. It has light-coloured connectors with clamps at both ends, with two wires in red and black insulation running between them.
The component is designed for strips up to 10 mm wide. A solderless connection makes installation easier: open the connectors, insert the strip and close the clamps.
The cable between the connectors allows a gap to be left between the lighting sections. This solution is useful when the strip needs to run in two separate sections without a rigid, direct connection.

Solderless clamp connector for single colour LED strips
Two housings joined by a two-core cable provide independent insertion points for the strip. This allows separate sections to be used in a single installation without replacing them with one continuous strip.
Closing clamps secure the strip ends inside the light-coloured housings. When making the connection, it is essential to match the contact layout. This accessory is neither a lamp nor a standalone power supply.
The red and black wires indicate a two-contact design. This model must not be used as a replacement for a four-channel RGB connector. Connections with different numbers of contacts require suitable, matching components.
The housings are made of PVC. Their compact dimensions make it easier to plan space for the connection within an LED strip installation. Lighting parameters, such as voltage and power, remain properties of the separately selected strip and power supply.
Product specifications
- Type: double-ended clamp connector
- Strip: single colour LED, up to 10 mm
- Connection: two sections without soldering
- Wires: 2: red and black
- Material: PVC
- Connector colour: white, light-coloured
Product dimensions
- Overall length / depth: 17,7 cm
- Housing width: 1,4 cm
- Height: 0,5 cm
- Gross weight: 0,009 kg
Why choose a double-ended LED connector?
- No soldering required – the clamps allow the connection to be secured.
- Two ends – the connector works with separate sections.
- Flexible cable – creates a gap between the strip ends.
- Two-contact design – matches a single colour LED strip.
- Compact size – makes it easy to allow space for the accessory.
- Simple function – does not replace lighting controls or the power supply.
Who is this product suitable for?
This connector is practical when working on single colour LED strip lighting where two sections need to be joined without making a soldered connection. The clamp connectors help prepare the connection at the point where the strip is divided.
Before use, check the strip width, number of contacts and correct wire polarity. The remaining installation components should be selected to match the characteristics of the LED strip itself.
Summary
The double-ended single colour connector allows two strip sections to be joined using clamps and a flexible cable. It is a compact accessory for LED installations with a two-contact layout. Check the width and contact arrangement before installation.









Reviews
There are no reviews yet.