Description
PABLA 2725 E Drive-Over In-Ground Light
The PABLA 2725 E drive-over in-ground light is designed for installation in the ground, paving or another suitably prepared surface. The low, round section visible after installation provides discreet lighting without a tall housing protruding above the ground.
The body is made from cast aluminium. The manufacturer’s product feed also specifies an aluminium cover and a polycarbonate diffuser and mounting box. The grey finish pairs well with stone, concrete and patio slabs.
A replaceable GU10 bulb with a maximum wattage of 35 W allows the light colour and brightness to be selected to suit the function of the location. The light operates at 230 V and has an IP67 protection rating. Before installation, the surface and electrical connection must be prepared in accordance with the manufacturer’s instructions.
The GU10 light source is not an integrated LED module, so the light colour depends on the bulb purchased. When choosing a location, allow access to the power connection and space for the mounting box. The dimensions of 15,5 cm in height and 9,3 cm in diameter help determine whether the light will fit into the prepared opening without interfering with other elements beneath the surface.

Drive-Over In-Ground Light for Discreet Pathway and Driveway Lighting
A low-profile design for installation in the ground provides lighting without tall bollards or wall lights along a pedestrian route. The light can be considered for placement beside a pathway, along a driveway or at the edge of a terrace, provided that the surface and installation method meet the product requirements.
A replaceable GU10 bulb makes it easy to select the desired lighting effect. The maximum wattage is 35 W, and the supply voltage is 230 V. The light source can be selected to suit the task, such as highlighting an architectural feature or marking the course of a paved area, taking into account the optics of the particular bulb.
An aluminium body forms the main structure, while the grey finish creates a visually understated detail within the surface. The round cover can complement paving blocks, slabs, stone and other surface materials.
The IP67 protection rating indicates dust-tightness and protection against temporary immersion under the conditions specified for this rating. This does not remove the need for proper preparation of the installation site, water drainage and a safe electrical connection. The manufacturer’s recommendations for installing the light must be followed.




Product Specifications
- Type: drive-over / in-ground light
- Model: PABLA 2725 E
- Colour: grey
- Body: cast aluminium
- Cover: aluminium according to the manufacturer’s product feed
- Diffuser and mounting box: polycarbonate according to the manufacturer’s product feed
- Light source: 1 × GU10, max. 35 W
- Voltage: 230 V
- Protection rating: IP67
Product Dimensions
- Height: 15,5 cm
- Diameter: 9,3 cm
- Weight: approximately 1 kg (estimated)

Why Choose the PABLA 2725 E Drive-Over In-Ground Light?
- Discreet in-ground design – the round, low-profile cover does not create a tall obstacle on the pathway.
- Replaceable GU10 bulb – allows the light colour and brightness to be selected within the 35 W limit.
- IP67 protection rating – specifies dust-tightness and protection against temporary immersion.
- Aluminium construction – the cast body and cover provide a metal finish.
- Polycarbonate components – according to the product feed, the diffuser and mounting box are made from this material.
- Diameter of 9,3 cm – makes it easier to plan the arrangement of lighting points within the surface.
Who Is This Light Suitable For?
This is an option for those planning low-profile lighting within a paved surface, for example along a pathway, beside a driveway or at the edge of a terrace. Before selecting it, check the ground conditions, whether a suitable opening can be made and access to the cable.
The replaceable GU10 bulb makes it easier to adapt the light to the purpose of each lighting point, while the small size of the visible section allows several lights to be arranged neatly. The IP67 rating should be one factor in assessing the entire installation, alongside the mounting method and water drainage.
When planning the layout, it is advisable to determine the spacing between lighting points and the direction of the light in advance, then select a GU10 bulb with suitable optics. This planning helps create a consistent line of lighting along the paved surface without introducing tall elements along the pedestrian route.
Summary
The PABLA 2725 E drive-over in-ground light has a grey cast aluminium body and uses one GU10 bulb rated up to 35 W at 230 V. Its IP67 protection rating and dimensions of 15,5 × 9,3 cm make it easier to assess whether it is suitable for the planned installation location.









Reviews
There are no reviews yet.